PARKING ASSIST MONITOR SYSTEM > DTC CHECK / CLEAR

for Preparation Click here

1. Connect the GTS to the DLC3.
   

2. Turn the ignition switch to ON.
   

3. Turn the GTS on.
   

4. Enter the following menus: Chassis / Advanced Parking Guidance/Parking Assist Monitor / Trouble Codes.
   

5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
   

6. Check for DTCs (Click here).
   

   NOTICE:

   The radio and display receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

   System	Proceed to
   Navigation System (for Radio and Display Type)	Click here

1. Connect the GTS to the DLC3.
   

2. Turn the ignition switch to ON.
   

3. Turn the GTS on.
   

4. Enter the following menus: Chassis / Advanced Parking Guidance/Parking Assist Monitor / Trouble Codes.
   

5. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
   

6. Clear the DTCs.