PARKING BRAKE CABLE (for TMC, TMMR Made) > INSTALLATION |
for Preparation Click here
1. INSTALL NO. 2 PARKING BRAKE CABLE CLAMP |
Install the No. 2 parking brake cable clamp to the No. 3 parking brake cable assembly.
2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
- Torque:
- Bolt (A):
- 8.5 N*m{ 87 kgf*cm , 75 in.*lbf }
- Bolt (B) and Nut:
- 6.0 N*m{ 61 kgf*cm , 53 in.*lbf }
Install the No. 3 parking brake cable assembly with the 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Install the clip to the No. 3 parking brake cable assembly.
3. INSTALL NO. 2 FLOOR UNDER COVER (for LH Side) |
for TMC Made:
Install the No. 2 floor under cover with the 6 nuts.
- HINT:
- The 6 nuts are attached to the No. 2 floor under cover.
- Torque:
- 4.0 N*m{ 41 kgf*cm , 35 in.*lbf }
Install the screw and 2 clips.
for TMMR Made:
Install the No. 2 floor under cover with the 6 nuts.
- HINT:
- The 6 nuts are attached to the No. 2 floor under cover.
- Torque:
- 4.0 N*m{ 41 kgf*cm , 35 in.*lbf }
Install the 2 clips.
4. INSTALL NO. 1 FLOOR UNDER COVER (for RH Side) |
for TMC Made:
Install the No. 1 floor under cover with the 5 nuts and 2 clips.
- HINT:
- The 5 nuts and 2 clips are attached to the No. 1 floor under cover.
- Torque:
- Nut:
- 4.0 N*m{ 41 kgf*cm , 35 in.*lbf }
Install the screw.
for TMMR Made:
Install the No. 1 floor under cover with the 5 nuts and 2 clips.
- HINT:
- The 5 nuts and 2 clips are attached to the No. 1 floor under cover.
- Torque:
- Nut:
- 4.0 N*m{ 41 kgf*cm , 35 in.*lbf }
5. CONNECT PARKING BRAKE SHOE LEVER |
6. INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR |
for 2AR-FE, 6AR-FSE:
Install the front No. 2 floor heat insulator with the 3 nuts.
- Torque:
- 4.9 N*m{ 50 kgf*cm , 43 in.*lbf }
7. INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 2AR-FE) |
8. INSTALL FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) (for 6AR-FSE) |
9. INSTALL NO. 4 PARKING BRAKE CABLE ASSEMBLY |
Install the No. 4 parking brake cable assembly to the parking brake equalizer.
Text in Illustration *1 No. 4 Parking Brake Cable Assembly *2 Rubber Boot *3 Parking Brake Equalizer
Slide the parking brake equalizer and rubber boot as shown in the illustration.
- NOTICE:
- Make sure that the rubber boot is securely inserted into the groove of the No. 4 parking brake cable assembly.
Connect the No. 3 parking brake cable assembly to the parking brake equalizer.
Text in Illustration *1 Parking Brake Equalizer *2 No. 2 Parking Brake Cable Assembly *3 No. 3 Parking Brake Cable Assembly *4 No. 4 Parking Brake Cable Assembly
Connect the No. 2 parking brake cable assembly to the parking brake equalizer.
10. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD) |
Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Temporarily install the adjusting nut.
Bend the parking brake pedal claw.
11. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD) |
Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.
Install the clip to the No. 1 parking brake cable assembly.
Temporarily install the adjusting nut.
Bend the parking brake pedal claw.
12. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD) |
13. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD) |