HAZARD WARNING SWITCH (for TMC, TMMR Made) > INSPECTION |
for Preparation Click here
1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY (HAZARD SWITCH) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 4 (HAZ) - 6 (GND) Hazard switch off 10 kΩ or higher Hazard switch on Below 1 Ω
If the result is not as specified, replace the heater control switch board.Text in Illustration *a Component without harness connected
(Air Conditioning Control Assembly (Hazard Switch))