AFS OFF SWITCH > INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT SWIVEL MAIN SWITCH (AFS OFF SWITCH)


    E136319
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 4
    Not pushed (OFF)
    10 kΩ or higher
    Pushed (ON)
    Below 1 Ω
    If the result is not as specified, replace the headlight swivel main switch (AFS OFF switch).
  1. Connect a positive (+) lead from the battery to terminal 3 and a negative (-) lead to terminal 2.

  1. Check that the illumination of the switch comes on.

    OK:
    The illumination comes on.
    If the result is not as specified, replace the headlight swivel main switch (AFS OFF switch).
    Text in Illustration 
    *a
    Component without harness connected
    (Headlight Swivel Main Switch (AFS OFF Switch))