TILT AND TELESCOPIC MANUAL SWITCH > REMOVAL

for Preparation Click here



1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD


2. REMOVE HORN BUTTON ASSEMBLY
(Click here)


3. REMOVE STEERING WHEEL ASSEMBLY


    C310282E01
  1. Remove the steering wheel assembly set nut.

    Text in Illustration 
    *a
    Matchmark
  1. Put matchmarks on the steering wheel assembly and steering main shaft.

  1. Disconnect the connectors from the spiral cable sub-assembly.



    C310283E01
  1. Using SST, remove the steering wheel assembly.

    Text in Illustration 
    *a
    Turn
    *b
    Hold
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05070)

    NOTICE:
    Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.


4. REMOVE LOWER STEERING COLUMN COVER


    C239718
  1. Remove the 3 screws.



    C239719
  1. Push the right and left sides of the lower steering column cover, and disengage the 2 claws to remove the lower steering column cover.

    NOTICE:
    Do not damage the tilt and telescopic switch.


5. REMOVE TILT AND TELESCOPIC SWITCH


    C239715
  1. Disconnect the connector.

  1. Disengage the claw and pull out the tilt and telescopic switch.

    NOTICE:
    Pushing on the claw too hard will break the claw.