ECM > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH |
Remove the nut and the front wiper arm and blade assembly LH.
3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH |
Remove the nut and the front wiper arm and blade assembly RH.
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH |
Disengage the claw and remove the front fender to cowl side seal LH.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH |
Disengage the claw and remove the front fender to cowl side seal RH.
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY |
Remove the 2 clips.
Disengage the 4 claws and remove the cowl top ventilator louver sub-assembly.
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK |
Disconnect the connector.
Remove the 4 bolts and the windshield wiper motor and link assembly.
8. REMOVE COWL TOP OUTER PANEL SUB-ASSEMBLY |
Remove the 4 bolts, 4 nuts and cowl top panel outer sub-assembly.
9. REMOVE ECM |
Remove the 3 nuts.
Disconnect the 2 connectors and remove the ECM.
Remove the 4 screws and 2 ECM brackets.