CHARGING SYSTEM > Noise Occurs from Generator while Engine is Running |
for Preparation Click here
INSPECTION PROCEDURE
1.CHECK LOOSENESS OF V-RIBBED BELT |
Check the tension of the belt by pushing it down with a finger.
- OK:
- The tension of the belt is enough.
|
| ||||
OK | |
2.CHECK V-RIBBED BELT FOR WEAR |
Check the V-ribbed belt for wear.
- OK:
- The V-ribbed belt is not worn.
|
| ||||
OK | |
3.CHECK CLUTCH PULLEY FOR WEAR |
Check the clutch pulley groove for wear or other defects.
- OK:
- The clutch pulley groove is not damaged.
|
| ||||
OK | |
4.CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING |
Perform a driving test and check if noise occurs when decelerating.
- OK:
- Noise does not occur.
|
| ||||
OK | ||
|