REAR AXLE HUB BOLT > REPLACEMENT |
for Preparation Click here
1. REMOVE REAR WHEEL |
2. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY |
Remove the bolt and separate the flexible hose from the shock absorber.
Remove the 2 bolts and separate the rear disc brake caliper assembly.
- NOTICE:
- Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.
3. REMOVE REAR DISC |
Put matchmarks on the rear disc and the axle hub.
Release the parking brake and remove the rear disc.
- HINT:
- If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.
4. REMOVE REAR AXLE HUB BOLT |
Temporarily install the 2 nuts and washers to the rear axle hub bolt as shown in the illustration.
Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
- SST
- 09628-10011
5. INSTALL REAR AXLE HUB BOLT |
Install a washer and nut to a new bolt as shown in the illustration.
Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
6. INSTALL REAR DISC |
Aligning the matchmarks, install the rear disc.
- HINT:
- When replacing the rear disc with a new one, select the installation position where the rear disc has the minimum runout.
7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY |
Install the rear disc brake caliper with the 2 bolts.
- Torque:
- 62 N*m{ 630 kgf*cm , 46 ft.*lbf }
- NOTICE:
- Do not twist the brake hose when installing the rear disc brake caliper assembly LH.
Install the rear flexible hose with the bolt.
- Torque:
- 19 N*m{ 192 kgf*cm , 14 ft.*lbf }
8. INSTALL REAR WHEEL |
- Torque:
- 103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }