FRONT SUSPENSION LOWER NO. 1 ARM > INSTALLATION |
for Preparation Click here
1. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM |
Install the front lower arm bushing stopper.
Install the front suspension lower No. 1 arm to the front frame assembly with the 3 bolts and the nut, but do not tighten them yet.
Tighten the 3 bolts in numerical order shown in the illustration.
- Torque:
- 200 N*m{ 2,040 kgf*cm , 148 ft.*lbf } (bolt A)
- 206 N*m{ 2,100 kgf*cm , 152 ft.*lbf } (bolt B)
2. INSTALL ENGINE MOUNTING INSULATOR |
Install the engine mounting insulator with the 3 nuts.
- Torque:
- 87 N*m{ 887 kgf*cm , 64 ft.*lbf }
3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE |
- HINT:
- Refer to the instructions for removal of the engine assembly (Click here for 2AZ-FE ,Click here for 2GR-FE).