SHIFT AND SELECT LEVER SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE CONTROL SHIFT LEVER BUSHING


    C069529
  1. Remove the control shift lever bushing from the No. 2 selecting bellcrank.



2. REMOVE NO. 1 SELECTING BELLCRANK DUST COVER


    C069530
  1. Remove the No. 1 selecting bellcrank dust cover from the No. 2 selecting bellcrank.



3. REMOVE SELECTING BELLCRANK SUPPORT SUB-ASSEMBLY


    C069532
  1. Remove the nut, wave washer, and selecting bellcrank No. 2 plate washer from the No. 2 selecting bellcrank.



    C069799
  1. Remove the selecting bellcrank support sub-assembly from the No. 2 selecting bellcrank.



4. REMOVE NO. 2 SELECTING BELLCRANK DUST COVER


    C069531
  1. Remove the No. 2 selecting bellcrank dust cover from the No. 2 selecting bellcrank.



5. REMOVE SELECTING BELLCRANK NO. 2 BUSHING


    C069798
  1. Remove the selecting bellcrank bushing from the No. 2 selecting bellcrank.



6. REMOVE NO. 2 SHIFT LEVER INNER


    C138351
  1. Hold the shift and select lever in a vise using aluminum plates.

    NOTICE:
    Do not damage the shift and select lever shaft.
  1. Using a pin punch (φ 5 mm), remove the 2 shift inner lever slotted pins.

    NOTICE:
    Do not damage the shift and select lever shaft.
  1. Apply force to the No. 1 select return compression spring and No. 2 select return compression spring, then hold them in a vise using aluminum plates.



    C069535
  1. Using 2 screwdrivers and a hammer, remove the select spring No. 2 seat snap ring from the shift and select lever shaft.

    NOTICE:
    Do not damage the shift and select lever shaft.


    C135406
  1. Remove the No. 2 select spring seat, No. 2 select return compression spring, and No. 2 shift lever inner from the shift and select lever shaft.



7. REMOVE NO. 1 SELECT SPRING SEAT


    C069538
  1. Remove the shift inter lock plate, No. 1 select return compression spring and No. 1 select spring seat from the shift and select lever shaft.



8. REMOVE SHIFT INTERLOCK PLATE COVER


    C091167E06
  1. Remove the shift interlock plate cover from the shift interlock plate.



9. REMOVE NO. 1 SHIFT LEVER INNER


    C091169E07
  1. Remove the No. 1 shift lever inner from the shift interlock plate.



10. REMOVE SELECT SPRING NO. 1 SEAT SHAFT SNAP RING


    C069539
  1. Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.

    NOTICE:
    Do not damage the shaft.


11. REMOVE CONTROL SHAFT COVER OIL SEAL


    D032770
  1. Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.

    HINT:
    Tape the screwdriver tip before use to avoid damage.