FLOOR SHIFT LEVER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B144609
  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B144599
  1. Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.



3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B144605
  1. Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.



4. REMOVE UPPER CONSOLE PANEL


    B144607E01
  1. Open the lid of the upper console panel.

  1. Apply protective tape to the area shown in the illustration.



    B144602
  1. Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.



5. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY


    B144604
  1. Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.



6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    C132951
  1. Remove the 2 clips and disconnect the end of the transmission control cable.



    C135402E01
  1. Pull out the control cable assembly locks.



    C132953
  1. Turn the adjust nut 180° clockwise. While holding the adjust nut, separate the control cable assembly.



7. REMOVE FLOOR SHIFT LEVER ASSEMBLY


    C132955
  1. Remove the 4 bolts and shift lever assembly.