CLUTCH UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE MANUAL TRANSAXLE ASSEMBLY

HINT:
Click here.


2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY


    C069774

  1. Remove the clutch release fork with the clutch release bearing from the transaxle assembly.



3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

  1. Remove the release bearing hub clip and clutch release bearing assembly from the clutch release fork.



4. REMOVE RELEASE FORK SUPPORT


    C083809

  1. Remove the release fork support from the manual transaxle assembly.



5. REMOVE CLUTCH RELEASE FORK BOOT


6. REMOVE CLUTCH COVER ASSEMBLY


    D008941E02

  1. Put matchmarks on the clutch cover assembly and flywheel sub-assembly.

  1. Loosen the 6 bolts one turn at a time until spring tension is released.

  1. Remove the 6 bolts and pull off the clutch cover assembly.

    NOTICE:
    Do not drop the clutch disc assembly.


7. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc assembly, the pressure plate and surface of the flywheel sub-assembly away from oil and foreign matter.